User`s guide

12-4
CW Commands (Measure Subsystem)
POWer
POWer
Description Sets the CW POWer MEASurement attributes. Queries the CW POWer MEASurement
result.
NOTE: This is only valid for RFAN:INP of ’RF IN/OUT’.
GPIB unit is V.
Display units are dBm, V, mv, uv, dBuv, W;
default unit is dBm.
Syntax MEASure:CW:POWer?
MEASure:CW:POWer[:MM] | [:AVG] | [:MET]
Options Refer to Appendices D, F and G.