User`s guide

10-14
Configure Subsystem
ROUT
ROUT
Description Selects/queries the OPT 001 REF OUT that appears on the rear panel.
Syntax CONFigure:ROUT?
CONFigure:ROUT <string>
Options ‘ON’ | ‘OFF’
Where
• ON means turn on the reference.
• OFF means turn off the reference (timebase oven still kept warm).
SPORt:BAUD
Description Selects/queries the BAUD rate for serial communication when using the rear panel Serial
PORt.
Syntax CONFigure:SPORt:BAUD?
CONFigure:SPORt:BAUD <string>
Options ’300’ | ’600’ | ’1200’ | ’2400’ | ’4800’ | ’9600’ | ’19200’
SPORt:DATA
Description Selects/queries the DATA length - the number of bits used for each word of serial data when
using the Serial PORt.
Syntax CONFigure:SPORt:DATA?
CONFigure:SPORt:DATA <string>
Options ‘7 BITS’ | ‘8 BITS’
SPORt:IBECho
Description Selects/queries the Serial PORt RS-232 input IBasic. ECHo state as On or Off - enable/
disable screen and error message echoing from IBASIC.
Syntax CONFigure:SPORt:IBECHo?
CONFigure:SPORt:IBECHo <string>
Options ‘ON’ | ‘OFF’