User`s guide

9-15
Cell Control Subsystem
CALL:STATus:CIPHering[:STATe]
CALL:STATus:CIPHering[:STATe]
Description Queries the CIPHering STATe.
Syntax CELL:CALL:STATus:CIPHering[:STATe]?
Options Returned as ‘ON’ or ‘OFF’
CALL:STATus:MM[:STATe]
Description Queries the Mobility Management (layer) STATe.
Syntax CELL:CALL:STATus:MM[:STATe]?
Options Returns state of the Mobility Management protocol layer as;
’LOC UPD’ | ’IDENT’ | ’AUTH’ | ’TMSI’ |
’INACTIVE’ | ’ACTIVE’
Where;
• LOC UPD means the MM sub-layer has received a Location Update Request from the
MS.
• IDENT means the MM sub-layer has initiated the Identification common procedure
and is waiting for the MS to respond.
• AUTH means the MM sub-layer has initiated the Authentication common procedure
and is waiting for the MS to respond.
• TMSI means the MM sub-layer has initiated the TMSI reallocation common procedure
and is waiting for the MS to respond.
• INACTIVE means there are no MM-connections between the Agilent 8922M/S and the
MS.
• ACTIVE means an MM-connection exists between the Agilent 8922M/S and the MS,
and may be used to transfer CC messages.