User`s guide

9-10
Cell Control Subsystem
AUDio:SPEech:EDELay
AUDio:SPEech:EDELay
Description Selects/queries the speech Echo delay.
This is the delay time for the ECHO speech mode. This only applies when
CELL:AUD:SPE:CONF is ECHO.
Default GPIB and display unit is seconds (S).
Syntax CELL:AUDio:SPEech:EDELay?
CELL:AUDio:SPEech:EDELay <integer [units]> | [:FNUM]
Options Refer to Appendix B.
AUDio:SPEech:GAIN
Description Sets/queries the speech GAIN (unitless).
This is the speech gain for the conditioned speech mode. This only applies when
CELL:AUD:SPE:CONF is CONDitioned.
Syntax CELL:AUDio:SPEech:GAIN?
CELL:AUDio:SPEech:GAIN <real [units]> | [:INUM]
Options Refer to Appendix A.
NOTE This feature is not available in the Agilent 8922S.
AUDio:SPEech:PRBS:PATTern
Description Sets/queries the speech PRBS pattern.
This is the pattern for the PRBS speech. This only applies when CELL:AUD:SPE:CONF
is PRBS.
Syntax CELL:AUDio:SPEech:PRBS:PATTern?
CELL:AUDio:SPEech:PRBS:PATTern <string>
Options ’CCITT-15’ | ’CCITT-23’ | ’0’ | ’1’ | ’01’ | ’10’