User`s guide

8-9
Cell Configuration Subsystem
CA
CA
Description Sets/queries the Cell Allocation.
Entries in CA table must be in contiguous ascending order. The allocation must begin at
CA1 and continue through CA<m>. Unallocated entries are turned off.
Where <m> = the highest number allocated in the range 1 to 16.
Syntax CCONfigure:DCS1800 | PCS1900 | EGSM:CA<n>?
CCONfigure:DCS1800 | PCS1900 | EGSM:CA<n> <integer>
Options 512 to 885 for DCS1800
0 to 124 | 975 to 1023 for EGSM
512 to 810 for PCS1900
Where <n> = 1 to 16
MA1
Description Sets/queries the Mobile Allocation 1.
This is a binary string representing which CA ARFCNs will be in Mobile Allocation
number 1. This defines which of the first 16 entries in the CA will be part of the sequential
hop sequence for MA1.
Syntax CCONfigure:DCS1800 | PCS1900 | EGSM:MA1?
CCONfigure:DCS1800 | PCS1900 | EGSM:MA1 <quoted string>
Options Not Applicable.
NOTE All 16 entries must be input.
MA1:IOFFset
Description Sets/queries the Mobile Allocation 1 Index Offset. This defines where the hop sequence
starts for MA1.
Syntax CCONfigure:DCS1800 | PCS1900 | EGSM:MA1:IOFFset?
CCONfigure:DCS1800 | PCS1900 | EGSM:MA1:IOFFset <integer> | [:INUM]
Options Refer to Appendix A.