User`s guide

6-3
Bit Error Test Subsystem
BITS
BITS
Description Sets/queries the number of BITS to test to make this Bit Error Test measurement complete.
Syntax BETest:BITS<n>?
BETest:BITS<n> <integer> | [:INUM]
Options Where <n>= 1 through 4.
Refer to Appendix A.
LOOPback:LDELay
Description Sets/queries the Loop DELay. This is the number of speech frames to be assumed for
loopback. delay. This affects how and when bit error test measurement bit patterns are
compared.
Syntax BETest:LOOPback:LDELay?
BETest:LOOPback:LDELay <integer> | [:INUM]
Options Refer to Appendix A.
LOOPback:LDELay:MODE
Description Sets/queries the Loop DELay MODE.
Syntax BETest:LOOPback:LDELay:MODE?
BETest:LOOPback:LDELay:MODE <string>
Options ’AUTO’ | ’MANUAL’
Where;
• AUTO automatically sets LDELay (above) once when the measurement is started. This
is a timing calibration action.
• MANUAL means the Loop DELay is controlled manually via the :LDELay command.