User`s guide

1-116 Chapter 1
Alphabetical Command Reference
LABE
LABE
Syntax
LABE<FWDM|FWDT|RESI|RESP|REVM|REVT><$>;
LABE<S11A|S11B|S11C|S22A|S22B|S22C><$>;
LABE<TRLL|TRLT|TRLR|TLFM|TLFT|TLRM|TLRT|TRFM|TRRM|TTFM|TTFT|TTRM|TTRT><$>;
Description
These commands enter a string (<$>) as the label for a standard class during a cal kit
modification. The string length must not exceed 10 characters.
Command Description Range for<$> Query Response
LABEFWDM Forward match ≤ 10 characters N/A
LABEFWDT Forward transmission ≤ 10 characters N/A
LABERESI Response, response and isolation ≤ 10 characters N/A
LABERESP Response ≤ 10 characters N/A
LABEREVM Reverse match ≤ 10 characters N/A
LABEREVT Reverse transmission ≤ 10 characters N/A
LABES11A S11A (opens) ≤ 10 characters N/A
LABES11B S11B (shorts) ≤ 10 characters N/A
LABES11C S11C (loads) ≤ 10 characters N/A
LABES22A S22A (opens) ≤ 10 characters N/A
LABES22B
1
S22B (shorts) ≤ 10 characters N/A
LABES22C S22C (loads) ≤ 10 characters N/A
LABETRLL TRL line or match ≤ 10 characters N/A
LABETRLT TRL thru ≤ 10 characters N/A
LABETRLR TRL reflect ≤ 10 characters N/A
LABETLFM TRL, Line, Forward, Match ≤ 10 characters N/A
LABETLFT TRL, Line, Forward, Trans ≤ 10 characters N/A
LABETLRM TRL, Line, Reverse, Match ≤ 10 characters N/A
LABETLRT TRL, Line, Reverse, Trans ≤ 10 characters N/A
LABETRFM TRL, Reflect, Forward, Match ≤ 10 characters N/A
LABETRRM TRL, Reflect, Reverse, Match ≤ 10 characters N/A
LABETTFM TRL, Thru, Forward, Match ≤ 10 characters N/A