Specifications

5-64
Hardkey/Softkey Reference
Analyzer Functions
If the value of the loop counter is zero, then the title
number goes in the last point of memory. If the loop
counter is greater than or equal to the current number of
measurement points, the number is placed in the first
point of memory. A data to memory command must be
executed before using the title to memory command.
outputs a title string to any device with an GPIB address
that matches the address set with the analyzer
commands.
This softkey is generally used for two purposes:
• Sending a title to a printer when a CR-LF is not
desired.
• Sending commands to an GPIB device.
outputs a title string to any device with an GPIB address
that matches the address set with the analyzer
commands. This softkey is generally used for two
purposes:
• Sending a title to a printer when a CR-LF is not
desired.
• Sending commands to an GPIB device.
outputs a title string to any device with an GPIB address
that matches the address set with the analyzer
commands.
This softkey is generally used for two purposes:
• Sending a title to a printer for data logging or
documentation purposes.
• Sending commands to a printer or other GPIB device.
is located in the ECal confidence menu and ECal service
menu. This softkey allows you to display the ECal module
factory response and measurement datain different forms.
The choices include: DATA, DATA&MEM, DATA/MEM,
DATA-MEM, and MEM.
is used in conjunction with other search features to track
the search with each new sweep. Turning tracking on
makes the analyzer search every new trace for the
specified target value and put the active marker on that
point. If bandwidth search is on, tracking searches every
new trace for the specified bandwidth, and repositions the
dedicated bandwidth markers.
TITLE TO P MTR/GPIB
Local
SET ADDRESSES
ADDRESS: P MTR/GPIB
TITLE TO PERIPHERAL
Seq
SPECIAL FUNCTIONS
PERIPHERAL GPIB ADDR
TITLE TO PRNTR/GPIB
Local
SET ADDRESSES
ADDRESS: PRINTER
TRACE TYPE [DATA]
TRACKING on OFF