Specifications

5-57
Hardkey/Softkey Reference
Analyzer Functions
sets up two-graticule, four-channel display as described in
the menu.
sets up single-graticule, four-channel display as described
in the menu.
sets up four-graticule, four-channel display as described in
the menu. Two of the graticules
are in Smith chart format with the other two in log format.
sets up two-graticule, four-channel display as described in
the menu.
sets up three-graticule, three-channel display as described
in the menu.
defines the standard type as a short, for calibrating
reflection measurements. Shorts are assigned a terminal
impedance of 0 Ω, but delay and loss offsets may still be
added.
for cal kits with different models for male and female test
port standards, this selects the short model for a female
test port. Note that the sex of a calibration standard
always refers to the test port.
for cal kits with different models for male and female test
port standards, this selects the short model for a male test
port. Note that the sex of a calibration standard always
refers to the test port.
used to display a specific menu prior to a pause statement
in a sequence.
takes one sweep of data and returns to the hold mode.
sets the limits at a single stimulus point. If limit lines are
on, the upper limit value of a single point limit is
displayed as ∨ and the lower limit is displayed as ∧. A
limit test at a single point not terminating a flat or sloped
line tests the nearest actual measured data point. A single
point limit can be used as a termination for a flat line or
sloping line limit segment. When a single point terminates
a sloping line or when it terminates a flat line and has the
same limit values as the flat line, the single point is not
displayed as ∨ and ∧. The indication for a single point
segment in the displayed table of limits is SP.
enables a measurement of a single segment of the
frequency list, without loss of calibration. The segment to
be measured is selected using the entry block.
SETUP B
4 PARAM HELP KEYS
SETUP C
4 PARAM HELP KEYS
SETUP D
4 PARAM HELP KEYS
SETUP E
4 PARAM HELP KEYS
SETUP F
4 PARAM HELP KEYS
SHORT
SHORT (F)
SHORT (M)
SHOW MENUS
SINGLE
SINGLE POINT
SINGLE SEG SWEEP