Specifications

5-53
Hardkey/Softkey Reference
Analyzer Functions
is used to enter the standard numbers for the first class
required for an S
22
1-port calibration. (For default cal kits,
this is the open.)
is used to enter the standard numbers for the second class
required for an S
22
1-port calibration. (For default cal kits,
this is the short.)
is used to enter the standard numbers for the third class
required for an S
22
1-port calibration. (For default kits,
this is the load.)
measures the short circuit TRL/LRM calibration data for
PORT 2.
selects whether sampler correction is on or off.
saves the modified version of the color set.
saves the display information to the disk drive. The type of
information saved is dependent on the FILETYPE
selection. The FILETYPE selection can either be graphic
or text.
accesses the save file menu which allows you to save the
display information to the disk drive as either graphic or
textual information.
stores the user-modified or user-defined kit into memory,
after it has been modified.
selects ASCII format for data storage to disk.
selects binary format for data storage.
provides access to all the menus used for saving and
recalling instrument states in internal memory and for
storing to, or loading from the internal or external disk.
This includes the menus used to define titles for internal
registers and external disk files, to define the content of
disk files, to initialize disks for storage, and to clear data
from the registers or purge files from disk.
changes the response value scale per division of the
displayed trace. In polar and Smith chart formats, this
refers to the full scale value at the outer circumference,
and is identical to reference value.
toggles between two selections for plot scale, FULL and
GRAT.
S22A
S22B
S22C
S22 REFL SHORT
SAMPLR COR on OFF
SAVE COLORS
SAVE FILE
SAVE FILE FORMATS
SAVE USER KIT
SAVE USING ASCII
SAVE USING BINARY
Save/Recall
SCALE/DIV
SCALE PLOT [ ]