Specifications

5-46
Hardkey/Softkey Reference
Analyzer Functions
toggles the power range mode between auto and manual.
Auto mode selects the power range based on the power
selected. Manual mode limits power entry to within the
±6to−12 dB selected range.
leads to the power meter calibration menu which provides
two types of power meter calibration, continuous (each
sweep) and single-sample (one sweep).
turns off power meter calibration, terminate a power
meter calibration sweep.
measures the absolute power amplitude at input R.
converts the active marker values into rectangular form.
The complex impedance values of the active marker are
displayed in terms of resistance, reactance, and equivalent
capacitance or inductance. This is the default Smith chart
marker.
NOTE Each of the range softkeys will have different ranges dependent on the
analyzer model and options installed.
selects power range 0 when in manual power range.
selects power range 1 when in manual power range.
selects power range 2 when in manual power range.
selects power range 3 when in manual power range.
selects power range 4 when in manual power range.
selects power range 5 when in manual power range.
selects power range 6 when in manual power range.
selects power range 7 when in manual power range.
selects power range 8 when in manual power range.
selects power range 9 when in manual power range.
selects power range 10 when in manual power range.
selects power range 11 when in manual power range.
specifies whether or not to store the raw data (ratioed and
averaged) on disk with the instrument state.
selects whether sampler and attenuator offsets are ON or
OFF. By selecting raw offsets OFF, a full two port error
correction can be performed without including the effects
of the offsets. It also saves substantial time at recalls and
during frequency changes. Raw offsets follow the channel
coupling. This softkey is used with "Take4" mode. Refer to
the examples in the programmer’s guide.
PWR RANGE AUTO man
PWRMTR CAL [ ]
PWRMTR CAL [OFF]
R
R+jX MKR
RANGE 0 [ ]
RANGE 1 [ ]
RANGE 2 [ ]
RANGE 3 [ ]
RANGE 4 [ ]
RANGE 5 [ ]
RANGE 6 [ ]
RANGE 7 [ ]
RANGE 8 [ ]
RANGE 9 [ ]
RANGE 10 [ ]
RANGE 11 [ ]
RAW ARRAY on OFF
RAW OFFSET On Off