Technical data

2-15

Using the 86100C

Quick Measure

Press Quick Measure and the Infiniium DCA automatically performs four

measurements on a displayed signal. Although there is a default set of mea-

surements for each instrument mode, except Jitter mode, you can select the

measurements to fit your needs. For example, in Oscilloscope mode the

default measurements are: rise time, fall time, period, and V amplitude. In

Eye/Mask mode you can also configure Quick Measure to perform a mask

test. In Jitter mode, Quick Measure displays graphs and can not be config-

ured.

To configure Quick Measure

•On the Measure menu, choose Quick Measure Config.

Figure 2-11. The Quick Measure Button