Technical data

2-7
Using the 86100C
A Quick Tour
CAUTION Optical channel fiber-optic connectors are easily damaged when connected to
dirty or damaged cables and accessories. When you use improper cleaning and
handling techniques, you risk expensive instrument repairs, damaged cables,
and compromised measurements. Before you connect any fiber-optic cable to
the digital communications analyzer, refer to “Connector Care” on page 1-37.
NOTE In addition to a complete line of modules designed specifically for this
instrument, modules designed for use with Agilent 83480A and 54750A
mainframes (8348x and 5475x series) can also be installed into the Infiniium
DCA. (The 83495A and 83495B clock recovery modules are the exception to
this numbering scheme and were designed specifically for use with 86100-
series mainframes.) The 8348x and 5475x series plug-in modules are equipped
with a trigger input on the individual module front panels. Repeatedly press the
Infiniium DCA’s front-panel Trigger Source button until the label for the
desired trigger source is lit.
Figure 2-6. Amplitude and time adjustments