Technical data

1-14

Installing the 86100C

Step 7. Windows Setup Wizard

This step requires several minutes to prepare Windows XP using the Windows

XP Setup Wizard. During the following steps, you will be instructed to “click”

with the pointing device. You can use a mouse (if you connected it) or you can

touch the screen with your finger.

CAUTION Before switching on this instrument, make sure the supply voltage is in the

specified range.

CAUTION Avoid touching the screen with a sharp object, as this could result in damage to

the display. Instead, use your finger.

1 Press the ON/OFF switch, , located at the lower left-hand corner of the

front panel.

Figure 1-6. ON/OFF Switch

2 Wait until the Welcome to the Windows XP Setup Wizard appears as shown

in the following figure.