Specifications

9
Additional capabilities
Standard functions
Standard functions are available through pull down menus and
soft keys, and some functions are also accessible through the
front panel knobs.
Markers
• Two vertical and two horizontal (user selectable)
TDR markers
• Horizontal — seconds or meter
• Vertical — Volts, Ohms or Percent Reflection
• Propagation — Dielectric Constant or Velocity
Limit tests
• Acquisition limits
Limit Test “Run Until” Conditions — Off, # of Waveforms,
# of Samples
Report Action on Completion — Save waveform to memory,
save screen image
• Measurement limit test
Specify Number of Failures to Stop Limit Test
When to Fail Selected Measurement — Inside Limits,
Outside Limits, Always Fail, Never Fail
Report Action on Failure — Save waveform to memory,
save screen image, save summary
• Mask limit test
Specify Number of Failed Mask Test Samples
Report Action on Failure — Save waveform to memory,
save screen image, save summary
Configure measurements
• Thresholds
10%, 50%, 90% or 20%, 50%, 80% or Custom
• Eye Boundaries
Define boundaries for eye measurments
Define boundaries for alignment
• Format Units for
Duty Cycle Distortion — Time or Percentage
Extinction/Contrast Ratio — Ratio, Decibel or Percentage
Eye Height — Amplitude or Decibel (dB)
Eye Width — Time or Ratio
Average Power — Watts or Decibels (dBm)
• Top Base Definition
Automatic or Custom
• Δ Time Definition
First Edge Number, Edge Direction, Threshold
Second Edge Number, Edge Direction, Threshold
• Jitter Mode
Units (time or unit interval, watts, volts, or unit amplitude)
Signal type (data or clock)
Measure based on edges (all, rising only, falling only)
Graph layout (single, split, quad)
Quick measure configuration
• Four user-selectable measurements for Each Mode, Eye-mask,
TDR, etc.
• Default Settings (Eye/Mask Mode)
Extinction Ratio, Jitter RMS, Average Power, Crossing
Percentage
• Default Settings (Oscilloscope Mode)
Rise Time, Fall Time, Period, V amptd
Histograms
• Configure
Histogram scale (1 to 8 divisions)
Histogram axis (vertical or horizontal)
Histogram window (adjustable window via marker knobs)
Math measurements
• Four user-definable functions Operator — magnify, invert,
subtract, versus, min, max
• Source — channel, function, memory, constant, response
(TDR)
Calibrate
All calibrations
• Module (amplitude)
• Horizontal (time base)
• Extinction ratio
• Probe
• Optical channel
Front panel calibration output level
• User selectable –2 V to 2 V
Utilities
Set time and date
Remote interface
• Set GPIB interface
Touch screen configuration/calibration
• Calibration
• Disable/enable touch screen
Upgrade software
• Upgrade mainframe
• Upgrade module