Specifications

31
Ordering Information
Passive probe
54006A 6 GHz passive probe
Infiniimax I active probes (1.5 to 7 GHz)
Note: The N1022B probe adapter is required to use these probes
with the 86100 DCA
Infiniimax I probe amplifiers
Note: Order one or more Infiniimax I probe head or connectivity
kit for each amplifier
1130A 1.5 GHz probe amp
1131A 3.5 GHz probe amp
1132A 5 GHz Iprobe amp
1134A 7 GHz probe amp
Infiniimax I probe heads
E2675A InfiniiMax differential browser probe head and
accessories. Includes 20 replaceable tips and
ergonomic handle. Order E2658A for replacement
accessories.
E2676A InfiniiMax single-ended browser probe head and
accessories. Includes two ground collar
assemblies, 10 replaceable tips, a ground lead
socket and ergonomic browser handle. Order
E2663A for replacement accessories.
E2677A InfiniiMax differential solder-in probe head and
accessories. Includes 20 full bandwidth and 10
medium bandwidth damping resistors. Order
E2670A for replacement accessories.
E2678A InfiniiMax single-ended/differential socketed probe
head and accessories. Includes 48 full bandwidth
damping resistors, six damped wire accessories,
four square pin sockets and socket heatshrink.
Order E2671A for replacement accessories.
E2679A InfiniiMax single-ended solder-in probe head and
accessories. Includes 16 full bandwidth and eight
medium bandwidth damping resistors and 24
zero ohm ground resistors. Order E2672A for
replacement accessories.
Infiniimax I connectivity kits (popular collections of the above
probe heads)
E2669A InfiniiMax connectivity kit for differential
measurements
E2668A InfiniiMax connectivity kit for single-ended
measurements
Infiniimax II active probes (10 to 13 GHz)
Note: The N1022B probe adapter is required to use these probes
with the 86100 DCA
Infiniimax II probe amplifiers
Note: Order 1 or more Infiniimax II probe heads for each amplifier.
Infiniimax I probe heads and connectivity kits can also be used
but will have limited bandwidth.
1168A 10 GHz probe amp
1169A 13 GHz probe amp
Infiniimax II probe heads
N5380A InfiniiMax II 12 GHz differential SMA adapter
N5381A InfiniiMax II 12 GHz solder-in probe head
N5382A InfiniiMax II 12 GHz differential browser
Probe adapters
N1022B Adapts 113x/115x,/116x active probes to
86100 Infiniium DCA
The N1022B adapter is powered by connecting it to the built-in
probe power connector available on some DCA modules (see
page 18 ), or to an external probe power supply. On modules
that do not have a built-in probe power connector, use an 1143A
external power supply. It is recommended to order option 001
on the 1143A, which provides a 5-foot power extension cable
(01143-61602). The 1143A power supply can power two probes.
Connectivity solutions
HDMI
N1080A H01 High performance coax based HDMI fixture with
plug (TPA-P)
N1080A H02 High performance coax based HDMI fixture with
receptacle (TPA-R)
N1080A H03 HDMI low frequency board
SATA
Note: These are available from COMAX Technology, see
www.comaxtech.com
iSATA plug to SMA – COMAX P/N H303000104
iSATA receptacle to SMA – COMAX P/N H303000204
ATCA
Note: These are available from F9 Systems, see
www.f9-systems.com
Advanced TCA Tx/Rx Signal Blade™
Advanced TCA Tx/Rx Bench Blade™
Call Agilent for connectivity and probing solutions not listed
above.
Firmware and software
Firmware and software upgrades are available through the Web
or your local sales office. www.agilent.com/find/dcaj