Specifications

30
Ordering Information
Dual electrical channel modules
86112A Dual 20 GHz electrical channels
86117A Dual 50 GHz electrical channels
86118A Dual 70 GHz electrical remote sampling channels
86118A-H01 Differential De-Skew
TDR/TDT modules
Included with each of these TDR modules is a TDR trigger cable,
two 50 Ω SMA terminations and one SMA short.
54754A Differential TDR module with dual 18 GHz
TDR/electrical channels
N1020A 6 GHz TDR probe kit
N1021B 18 GHz Differential TDR Probe Kit
N1024B TDR Calibration kit
Precision timebase module
86107A Precision timebase reference module
86107A-010 2.5 and 10 GHz clock input capability
86107A-020 10 and 20 GHz clock input capability
86107A-040 10, 20 and 40 GHz clock input capability
Clock recovery modules
The following modules provide a recovered clock from the data
signal for triggering at indicated data rates:
83496B 50 Mb/s to 7.1 Gb/s Clock recovery module. This
module is not compatible with the 86100A and
86100B DCA mainframes. If you want to upgrade
older DCAs, contact Agilent Technologies and ask
for current trade-in deals.
83496B-100 Single-ended and differential electrical with
integrated signal taps
83496B-101 Single Mode (1260-1360 nm and
1490-1600 nm) and multimode (830-860 nm and
1260-1360 nm) optical. Integrated signal taps.
Single-ended or differential electrical inputs
(no signal taps).
83496B-200 Increase operating range to 50 Mb/s to 14.2 Gb/s
83496BU-200 Upgrade data rate 0.05 Gb/s to 14.2 Gb/s
83496B-201 Shift operating range to 7.1 to 14.2 Gb/s
83496BU-201 Upgrade shift operating range to 7.1 to 14.2 Gb/s
83496B-300 Add tunable loop bandwidth “golden PLL” capability
83496BU-300 Upgrade adjustable loop bandwidth
Precision waveform analyzer module
Dual electrical channel module with integrated clock recovery and
precision timebase.
86108A-100 Dual 32 GHz electrical channels, integrated clock
recovery (50 Mb/s to 14.2 Gb/s) with integrated
precision timebase
86108A-001 Two 3.5 mm phase trimmers for skew adjustment
86108A-002 Two precision 3.5 mm 18 inch cables
86108A-003 Two 3.5 mm 3 dB attenuators
86108A-006 Two 3.5 mm 6 dB attenuators
86108A-010 Two 3.5 mm 10 dB attenuators
86108A-020 Two 3.5 mm 20 dB attenuators
Warranty options (for all products)
R1280A Customer return repair service
R1282A Customer return calibration service
Accessories
11898A Extender module for plug-in modules
86101-60005 Filler panel
0960-2427 USB keyboard (included with 86100C)
1150-7799 USB mouse (included with 86100C)
9300-1308 ESD Heel strap
9300-1367 ESD Wrist strap
9300-1484 ESD Desk mat
9300-0980 ESD Wrist strap ground cord
Optical connector adapters
Note: Optical modules come standard with one FC/PC connector
adapter
81000 AI Diamond HMS-10 connector
81000 FI FC/PC connector adapter
81000 SI DIN connector adapter
81000 VI ST connector adapter
81000 KI SC Connector adapter
RF/Microwave accessories
11636B Power divider, DC to 26.5 GHz, APC 3.5 mm
11636C Power divider, DC to 50 GHz, 2.4 mm
11742A 45 MHz to 26.5 GHz DC blocking capacitor
11742A-K01 50 GHz DC blocking capacitor
8490D-020 2.4 mm 20 dB attenuator
11900B 2.4 mm (f-f) adapter
11901B 2.4 mm (f) to 3.5 mm (f) adapter
11901C 2.4 mm (m) to 3.5 mm (f) adapter
11901D 2.4 mm (f) to 3.5 mm (m) adapter
5061-5311 3.5 mm (f-f) adapter
1250-1158 SMA (f-f) adapter
1810-0118 3.5 mm termination
0960-0055 Short
1250-1666 SMA (f-f) adapter feedthru