Specifications

29
Ordering Information
86100C Infiniium DCA-J mainframe
86100C-001 Enhanced trigger
86100CS-001 Enhanced trigger upgrade kit
86100C-061 MATLAB - Basic Oscilloscope Package
86100C-062 MATLAB - Standard Oscilloscope Package
86100C-701 Standard trigger (default)
86100C-090 Removable hard drive
86100C-092 Internal hard drive (default)
86100C-200 Jitter analysis software
86100CU-200 Enhanced Jitter analysis software upgrade
86100C-201 Advanced waveform analysis software
86100CU-201 Advanced waveform analysis software upgrade
86100C-202 Enhanced impedance and S-parameter software
86100CU-202 Enhanced impedance and S-parameter software
upgrade
86100C-300 Amplitude analysis/RIN/Q-factor
86100CU-300 Amplitude analysis/RIN/Q-factor upgrade
86100CU-400 PLL and Jitter Spectrum software
86100CU-401 Advanced EYE analysis software
86100C-AFP Module slot filler panel
86100C-AX4 Rack mount flange kit
86100C-AXE Rack mount flange kit with handles
86100C-UK6 Commercial cal certificate with test data
NOTE:
Options 200 and 201 require Option 001 (enhanced trigger).
Option 300 requires Options 200 and 001.
Option 400 and 401 require Microsoft Office Excel 2003/2007.
Option 401 requires Options 001/200 for DDPWS measurement.
Options 610 and 620 require a 54754A module and Option 202.
Optical/electrical modules
86105C 9 GHz optical channel; single-mode and multimode,
amplified (750 to 1650 nm)
20 GHz electrical channel
86105C-100 155 Mb/s through 8.5 Gb/s (choose 4 filter rates
from Options 86105C-110 through 86105C-195)
86105C-110 155 Mb/s
86105C-120 622 Mb/s (also covers 614 Mb/s)
86105C-130 1.063 Gb/s
86105C-140 1.244/1.250 Gb/s (also covers 1.229 Mb/s)
86105C-150 2.125 Gb/s
86105C-160 2.488/2.500 Gb/s (also covers 2.458 Gb/s)
86105C-170 2.666 Gb/s
86105C-180 3.125 Gb/s (also covers 3.072 Gb/s)
86105C-190 4.250 Gb/s
86105C-193 5.0 Gb/s
86105C-195 6.250 Gb/s (also covers 6.144 Gb/s)
86105C-200 8.5, 9.953, 10.3125, 10.519, 10.664, 10.709, 11.096,
11.317 Gb/s
86105C-300 Combination of rates available in 86105C-100 and
86105C-200
86105D
2
20 GHz optical channel; single-mode and
multimode, (750-1650 nm); filters for 8.5, 9.953,
10.3125, 10.519, 10.664, 10.709, 11.096, 11.317,
14.025 Gb/s; 35 GHz electrical channel
86115D
2
20 GHz multi-optical port plug-in module;
single-mode and multimode (750-1650 nm); filters
for 8.5, 9.953, 10.3125, 10.519, 10.664, 10.709,
11.096, 11.317, 14.925 Gb/s
86115D-002 Two optical channels
86115D-004 Four optical ports mulitplexed to two optical
channels through 2 integral 1X2 optical switches
86116C
2
40 to 65 GHz optical / 80 GHz electrical sampling
module, 1300 to 1620 nm
Select exactly one reference receiver option:
86116C-025: 40 GHz opt./80 GHz elec. channels,
17.0/25.8/27.7 Gb/s reference receiver
86116C-041: 65 GHz opt./80 GHz elec. channels,
39.81/41.25/43.02 Gb/s reference receiver
This module is not compatible with the 86100A and
86100B DCA mainframes. If you want to upgrade
older DCAs, contact Agilent Technologies to
discuss current trade-in deals.
All optical modules have FC/PC connectors installed on each
optical port. Other connector adapters available as options are:
Diamond HMS-10, DIN, ST and SC.
1. 86105C Option 197 provides a 6.375 GHz BT filter and is compatible with early
drafts of the 8X Fibre Channel standard. The final version of INCITS FC-PI-4
requires compliance test to be done with the 10.3125 Gb/s Ethernet filter that is
provided only in Options 200 or 300.
2. This module is not compatible with the 86100A and 86100B
DCA mainframes. If you want to upgrade older DCAs,
contact Agilent Technologies to discuss current trade-in deals.