Specifications
21
Modules Specifications
Single-mode Optical/Electrical
High bandwidth single-mode
optical/electrical modules
86116C
1
Option 025
86116C
1
Option 041
Optical channel specifications
Optical channel unfiltered bandwidth 45 GHz 65 GHz
Wavelength range 1300n m to 1620 nm
4
Calibrated wavelengths 1310 nm/1550 nm
Optical sensitivity 1310 nm –9 dBm (17 Gb/s)
–8 dBm (25.8 Gb/s)
–7 dBm (27.7 Gb/s)
–3 dBm (39.8/43.0 Gb/s
1550 nm –10 dBm (17 Gb/s)
–9 dBm (25.8 Gb/s)
–8 dBm (27.7 Gb/s)
–5 dBm (39.8/43.0 Gb/s)
Transition time
(10% to 90% calculated from Tr = 0.48/BW optical)
7.4 ps (FWHM)2
RMS noise
Characteristic 1310 nm 13 μW (17 Gb/s)
17 μW (25.8 Gb/s)
20 μW (27.7 Gb/s)
60 μW (40 GHz)
54 μW (39.8/43.0 Gb/s)
75 μW (55 GHz)
105 μW (60 GHz)
187 μW (65 GHz)
1550 nm 10 μW (17 Gb/s)
12 μW (25.87 Gb/s)
14 μW (27.7 Gb/s)
40 μW (40 GHz)
36 μW (39.8/43.0 Gb/s)
50 μW (55 GHz)
70 μW (60 GHz)
125 μW (65 GHz)
Maximum 1310 nm 18 μW (17 Gb/s)
20 μW (25.8 Gb/s)
30 μW (27.7 Gb/s)
120 μW (40 GHz)
102 μW (39.8/43.0 Gb/s)
127 μW (55 GHz)
225 μW (60 GHz)
300 μW (65 GHz)
1550 nm 15 μW (17 Gb/s)
18 μW (25.8 Gb/s)
21 μW (27.7 Gb/s)
80 μW (40 GHz)
68 μW (39.8/43.0 Gb/s)
85 μW (55 GHz)
150 μW (60 GHz)
200 μW (65 GHz)
1. 86116C requires an 86100C mainframe and software revision 7.0 or above.
2. FWHM (Full Width Half Max) as measured from optical pulse with 700 fs FWHM, 5 MHz repetition rate and 10 mW peak power.
3. Smallest average optical power required for mask test. Values represent typical sensitivity of NRZ eye diagrams. Assumes mask test with compliance filter switched in.
4. Contact Agilent for broader wavelength specifications.