User`s guide

5-5
Servicing
Spare Channel Replacement Procedure
you for the switch layer on which to install the spare fibers:
Press
1
for layer 1
Press
2
for layer 2
10
The display will prompt you to enter 1 for spare fiber 1, or 2 for spare fiber 2.
You recorded this identification number in Step 4.
11
The display will prompt you to enter the number of the front or rear panel
channel to be replaced. Enter the number of the channel and press
Enter
.
The display will show the intended cable changes.
12
Press
Enter
to confirm the changes.
.
Figure 5-1. Top view of the Agilent 86060C or 86061C lightwave switch