User`s guide

4-24

Programming

:STATus:PRESet

The :STATus:PRESet command presets the enable registers for all status

nodes. Enable registers have no function in this instrument, but the command

is included for compatability with the SCPI standard. Table 4-5 shows the

value of each enable register.

Usage:

GPIB only

Query Syntax:

:STATus:PRESet

Example: OUTPUT 711;":STATUS:PRESET"

:SYSTem:ERRor

The :SYSTem:ERRor query returns the next error number and error descrip-

tion in the error queue over the interface. This instrument has an error queue

100 errors deep and operates on a first-in, first-out basis. Repeatedly sending

the query :SYSTEM:ERROR? returns the error numbers and descriptions in

the order in which they occur until the queue is empty. Any further queries

returns "+0,No errors" until another error occurs. Refer to Table 4-6 for the

error numbers and descriptions.

Usage:

GPIB and RS-232

Query Syntax:

:SYSTem:ERRor?

Returned Format:

Table 4-5. Values of the Enable Registers

Status Node Preset Value

Operation 0

Questionable 0