User`s guide

4-16
Programming
*RST (Reset)
Command Syntax:
*RCL <value>
Where:
<value> ::= 0 to 9 (integer–NR1 format)
Example: OUTPUT 711;"*RCL 3"
*RST (Reset)
The *RST command returns the switch to its power-up condition. For all lay-
ers, each port is set to its OFF position or channel 1.
Usage:
GPIB and RS-232
Command Syntax:
*RST
Example: OUTPUT 711;"*RST"
*SAV (Save)
The *SAV command saves the current state of the instrument to the specified
instrument state register.
Usage:
GPIB and RS-232
Command Syntax:
*SAV <value>
Where:
<value> ::= 0 to 9 (integer–NR1 format)
Example: OUTPUT 711;"*SAV 3"