User`s guide

1-5
General Information
Channels, Options, and Accessories
Table 1-2. Options
(1 of 2)
Option Description
Number of Input Channels (select one):
Option 001 Single input channel
Option 002 Two input channels
Wavelength and Fiber Type (select one):
Option 109
1280–1650 nm, 9/125
µ
m single-mode fiber
Option 163
750–1350 nm, 62.5/125
µ
m multimode fiber
Option H51
750–1350 nm, 50/125
µ
m multimode fiber (special order)
Port Type (select one):
Option 050 Connectors on front panel. (Only available on an Agilent 86060C or
HP 86061C, with Option 204.)
Option 051 Connectors on rear panel. (For connectorized outputs only.)
Option 052 3 meter fiber out of the rear panel. (For connectorized outputs, the
connector is at the end of the 3 meter fiber.)
Output Channels (select one):
Option 2XX Where XX is the number of connectorized output channels.
(Note: Option 200 is 100 connectorized output channels.)
Option 3XX Where XX is the number of non-connectorized output channels.
(Note: Option 300 is 100 non-connectorized output channels.)
Connector Type (for connectorized ports or fibers only):
Option 012 FC/PC connectors
Option 014 ST connectors
Option 017 SC connectors
FC/APC or SC/APC connectors (special order)