User`s guide

transit case, lo-16
accessories shipped with the analyzer, 1-3
ac coupling, 7-30
ACPGRAPH , 7-6
AC power source, lo-14
AC probe, lo-14
active function, 2-12
active function block, 2-1
active function clearing, 7-48
addressing printer, 7-69
address of plotter, 7-63
address of spectrum analyzer, 7-10
adjacent channel power, 7-6
extended dynamic range, 7-7
using, 4-44-47
adjacent channel power graph, 7-6
adjacent channel power measurement, 4-43
adjacent channel power ratio, 7-6
ADJ CHAN POWER, 7-6
ADJ CHAN PWR extd, 7-7
ALC INT EXT, 7-7
ALC MTR INT XTAL, 7-7
ALC TEST, 7-2, 7-8
aliasing
FFT function, 4-3
signal identification, 7-79
ALL DLP --f CARD, 5-16, 7-8
alpha characters, 7-5, 7-47, 7-82, 7-92
AM/FM demodulation
use with Option 105, 4-23
AM/FM demodulator with speaker
and quasi-peak detector (Option 103), 10-9
and TV sync trigger circuitry (Option 102),
10-9
% AM ON OFF, 4-40, 7-4
Amp Cor, 5-38, 7-8
AMP COR, 7-8
AMP COR ON OFF, 5-37, 5-39, 7-8
amplifiers, lo-14
AMPLITUDE, 2-1, 2-13, 7-8
amplitude accuracy, 7-30
amplitude and frequency self-calibration
routine, 7-14
amplitude correction
amplitude coordinate, 5-39
frequency coordinate, 5-39
point, 5-38
testing, 5-39
using RECALL AMP COR, 5-39
using SAVE AMP COR, 5-39
amplitude-correction factors, 5-35-39
amplitude correction factors, 5-35
cataloging, 7- 16
delete point, 7-33
edit, 7-36
edit done, 7-36
menus, 7-8
on or off, 7-8
purge, 7-70
recall table, 7-73
save table, 7-75
select amplitude, 7-76
select frequency, 7-77
select point, 7-77
select sweep time, 7-78
storing, 7-8
amplitude-correction functions, 5-38
amplitude-corrections
creating, 5-36
amplitude corrections
creating, 5-37
editing, 5-36
amplitude demodulation, 7-33
amplitude menus, 7-8
amplitude modulation, 7-4
amplitude modulation measurement, 4-39
amplitude scale, 7-76
amplitude self-calibration, 7-13
amplitude units, 7-8
dBm, 7-31
dBmV, 7-31
dBuV, 7-31
Volts, 7-9 1
Watts, 7-9 1
Amptd Units, 7-8
analog + display, 7-9
using, 5-31-32
ANALOG+ ON OFF, 7-9
ANALYZER ADDRESS, 7- 10
analyzer battery, 2-22
analyzer distortion products, 3-20
ANALYZER GAINS, 7-2, 7-10
analyzer memory
cataloging functions, 7-18
catalog variables, 7-2 1
delete file, 7-33
DLP cataloging, 7- 18
erase user programs and variables, 7-35
program and variable cataloging, 7-16
recalling amplitude-correction factors, 5-8
recalling a state, 5-6
recalling a trace, 5-7
recalling limit lines, 5-8
saving amplitude-correction factors, 5-8
saving and recalling data, 5-6
saving a state, 5-6
saving a trace, 5-7
saving limit lines, 5-8
saving to, 7-88
state and trace register status, 7-21
Index-2