User`s guide
YTF SPAN
YTF TUNE
COARSE
YTF TUNE
FINE
YZ-#
spc
Clear
ZERO
MARKER
ZERO
SPAN
ZONE
CENTER
HP
8592L,
HP 85933, HP
85954
or HP 8596E only.
displays a trace of the voltage driving the YTF as it sweeps through the
displayed span. This is a service diagnostic function and is for service use only,
Refer to the service guide for more information.
Front-Panel Key Access: (CAL)
HP
8592L,
HP 85933, HP
85953
or HP 8596E only.
displays the output produced by the
YTF
coarse-tune DAC located on the
A7 Analog Interface assembly. This is a service diagnostic function and is for
service use only.
Front-Panel Key Access:
@iiJ
HP
8592L,
HP 85933, HP
85954
or HP 8596E only.
displays the output produced by the
YTF
fine-tune DAC located on the
A7 Analog Interface assembly. This is a service diagnostic function and is for
service use only.
Front-Panel Key Access:
ICAL)
accesses the
softkey
menu used for selecting the characters Y, Z, underscore
(-),
#,
space, or for clearing the screen title.
Front-Panel Key Access:
a),
(CONFIG),
[DISPLAY],
(?GXQ,
or
ISAVE)
Option 105 only. Option 101 is recommended.
zeros the value of the delta marker to establish a new reference. The
ZERO MARKER
softkey
is in the pulse parameter entry menus of the gate
utility.
Front-Panel Key Access: [SWEEP)
changes the frequency span to zero and turns off marker track if it is on.
Front-Panel Key Access:
ISPAN)
HP 8591
E,
HP
8593E,
HP
8594E,
HP
8595E,
or HP 8596E only.
allows the zone markers to be moved in frequency without changing the zone
span. The zone markers are vertical lines marking the zone on the upper
window. They correspond with the frequency range displayed in the lower
window. As the zone markers are moved the center frequency of the lower
window is changed but the lower window will not be updated unless it is
active.
The zone can be moved beyond the frequency range that is being displayed
in the upper window. Its movement is limited to the frequency range of the
spectrum analyzer. The zone markers will be displayed at the edges of the
upper window when the zone is moved beyond the displayed frequency range.
Front-Panel Key Access: WINDOWS (ON)
7-92 Key Descriptions