User`s guide
SELECT
TIME
allows you to enter the time value for a limit-line segment. The time value is
with respect to the spectrum analyzer sweep time.
A
time value of zero is the
start of the sweep, which is the left edge of the graticule. Enter the time value
by using the data keys. Change the time value by using the step keys or the
knob. Press
[BKSPI)
to correct errors.
Note
Limit-line data is sorted in time order in the limit-line table. The sorting occurs
after you have entered the time and at least one amplitude value.
Front-Panel Key Access:
@i’GG%j
SELECT
TYPE
accesses the
softkey
menu used to select the limit-line type of line. Press FLAT
to select a flat line, press SLOPE to select a sloped line, or press POINT to
select a point.
Front-Panel Key Access:
(-1
SELECT
UPR AMPL
allows you to enter the amplitude value for the upper limit-line segment.
Enter the amplitude value for the selected frequency or time by using the
knob or data keys. Press
(BKm]
to correct errors.
Front-Panel Key Access:
(@iWX]
Service
Cal
accesses several service calibration functions. The service calibration functions
are designed for service use only. More detailed descriptions of the service
functions are available in the service documentation. Service documentation
can be obtained by ordering Option 915 through your HP Sales and Service
office. For a listing of all available service calibration functions, refer to
“Service Functions” at the beginning of this chapter.
Front-Panel Key Access:
ICAL)
Service
Diag
accesses several service diagnostic functions. The service diagnostic functions
are designed for service use only. More detailed descriptions of the service
diagnostic functions are available in the service documentation. Service
documentation can be obtained by ordering Option 915 through your HP Sales
and Service office. For a listing of all available service diagnostic functions,
refer to “Service Functions” at the’beginning of this chapter.
Front-Panel Key Access:
m
SET ATTN
ERROR
Set B&W
Printer
sets the calibration attenuator-error factors (this is not the same as the input
attenuator). This is a service calibration function and is for service use only.
Front-Panel Key Access:
a
accesses the
softkeys
for setting up black and white HP and Epson compatible
printers.
Front-Panel Key
Access:(Wj
Set Colr
accesses the
softkey
for setting up the HP
PaintJet
and DeskJet printers.
Printer
Front-Panel Key
Access:(Nj
7-78 Key Descriptions