User`s guide
qP
x10
ON OFF
qP
DET
ON OFF
qP
GAIN
ON OFF
QPD
OFFSET
qPD
RST
ON OFF
Quasi
Peak
(FEiii]
Option 103 only.
amplifies the video signal ten times (20
dB)
in order to make an accurate
measurement of a low quasi-peak signal. See the HP 85913, HP 85933
HP 85943, HP 85953, or HP 85963 Option 103 supplement
documentaiion
for
more information.
Front-Panel Key Access:
@Y?Y%CTRL_)
0ption
103 only.
turns the quasi-peak detector on and off. This is a service diagnostic function
and is for service use only. See either the service documentation or the
HP 85913, HP
8593E,
HP 85943, HP 85953, or HP 85963 Option 103
supplement documentation for more information.
Front-Panel Key Access:
@&ZYj
or
a
Option 103 only.
amplifies the video signal ten times (20
dB).
This is a service diagnostic
function and is for service use only.
Front-Panel Key Access:
ICAL)
Option 103 only.
sets the offset of the quasi-peak detector. This is a service diagnostic function
and is for service use only.
Front-Panel Key Access:
a
0ption
103 only.
discharges and resets the quasi-peak detector. This is a service diagnostic
function and is for service use only.
Front-Panel Key Access:
ICAL)
Option 103 only.
accesses the menu of quasi-peak
softkey
functions and, if there is not an
on-screen marker, places a marker on the highest on-screen signal. See
the HP 85913, HP 85933, HP 85943, HP 85953, or HP 85963 Option 103
supplement documentation for more information.
Front-Panel Key Access:
CAUXCTRL)
accesses
softkey
menus that allow you to recall data from the memory card
or spectrum analyzer memory. When INTERNAL is selected, states, traces,
limit-line tables, amplitude-correction factors can be recalled from spectrum
analyzer memory. When CARD is selected, states, traces, limit-line tables, and
amplitude-correction factors, display images, and downloadable programs can
be recalled from the memory card. Option 003 is required to use a memory
card with the HP
859OL,
HP
8592L,
and HP 8594L only.
In addition, pressing
[%GGJ
accesses the cataloging functions used to catalog
the saved data that is in spectrum analyzer memory or on the memory card. It
also accesses the DLP editor utility.
7-72 Key Descriptions