Specifications

General
HP-IB Interface
SHl, AHl, T6, L4, SRI, RLl, PPO, DCl, DTl, Cl, C2, C3, C28, E2
Functions
Environmental
Temperature
Operation: 0 “C to 55 “C
Storage:
-40 “C to 75 “C
Note
Increased internal temperatures may result if the rear-panel air filters
are not cleaned regularly.
Altitude
Operation: 14,572 m (15,000 feet)
Storage: 115,240 m (50,000 feet)
Power Requirements 50 to 60 Hz; 100, 120, 220, or 240
volts (+5%, -10%); approximately
450 VA (40 VA in standby). 400 Hz operation is available as Option
400.
Humidity
Operation
Except as noted in electrical specifications, type tested at <95%
relative humidity, 25 “C to 40 “C for 5 days.
Storage
5% to 90% relative humidity, 0 “C to 40 “C.
EMI
Conducted and radiated interference is within the requirements
of MIL-STD 461C, Part 7 RE02 and CEO3 (Air Force), and
within the requirements of CISPR Publication 11 and
Messempfaenger-Postverfuegung 526/527/79 (Kennzeichnung Mit
F-Nummer/Funkschutzzeichen).
X-Rays
IF Section Serial Prefix 3004A and above
X-rays generated by this instrument are sufficiently screened.
Die in diesem geraet entstehende roentgenstrahlung ist ausreichend
abgeschirmt.
accel. voltage / beschl. spg < 20 kV
IF Section Serial Prefix 3001A and below
When operating, this instrument emits x-rays; however, it is well
shielded and meets safety and health requirements of various
countries, such as the X-Ray Radiation Act of Germany.
3-l 6 Specifications