Specifications

13. Connect the ac line power cords.
14. If the HP 8568B will be remotely controlled, refer to “To Set the
HP-IB Address” in this chapter.
15. When you turn your instrument on for the first time, you should
perform the verification tests in Chapter 5. Refer to the HP8568B
Operation and Programming Manual for instructions on using
the instrument.
Cables W37 and W38 are removed for connection of the IF and VIDEO
ports to the HP 85650A Quasi-Peak adapter. If the instrument is used
without the HP 8565OA Quasi-Peak adapter, W37 and W38 must be
connected for the instrument to operate.
2-12 Installation