Specifications

2
Installation
What You’ll Find in
This chapter describes the process of getting the HP 8568B spectrum
This Chapter
analyzer ready to use. The process includes initial inspection and
installing the unit. Before installing the HP 8568B, be sure to read all
the warnings, cautions, and notes listed in “Safety” below.
1 If you are not installing the instrument in a rack, refer to “To Install
Standard Instruments” in this chapter.
n To install Option 908 or 913 instruments, refer to “To Install Option
908 and 913 Instruments” in this chapter.
n To install Option 010 instruments, refer to “To Install Option 010
Instruments” in this chapter.
Safety .............................................. 2-l
Preparation for Use
..................................
2-3
Initial Inspection
..................................
2-3
Operating Environment
............................
2-3
Power Requirements
...............................
2-3
To Install Standard Instruments
....................... 2-4
To Install Option 908 and 913 Instruments
.............
2-7
To Install Option 010 Instruments
.................... 2-13
To Set the HP-IB Address
............................
2-20
From the Front Panel
.............................
2-20
From the HP-IB Bus
..............................
2-20
From the HP-IB Address Switch
...................
2-20
Safety
Before installing or operating this instrument, you should familiarize
yourself with the safety marking on the instrument and the safety
instructions in the manuals. The instrument has been manufactured
and tested in accordance with international safety standards.
However, to ensure safe operation of the instrument and personal
safety of the user, the cautions and warnings in the manuals must be
followed. Refer to the summary of the safety information located
near the front of this manual.
Installation 2-l