Specifications

76
ConnectthePNA-X,PNAorPNA-LtoPSG,ESG,orMXGsourceasshowninFigure57.
ThereisaLANorGPIBinterfaceavailableontherearoftheinstrumenttoconnect
external sources. Below is an example setup for the GPIB interface.
Figure 57. Configuring an external source.
1. Setting up a source:
a) Obtain GPIB addresses of your sources.
2. Setting up PNA Series network analyzers and measurement receivers:
a) Select External Source Config…> Utility > System > Configure as shown in the
menu below.
Appendix 3:
How to configure an
external source for use
with a PNA Series
LAN or GPIB
Trigger out
PNA Series
Trigger in
Trigger in/out
PSG or MXG source