Service manual

2-36 8510XF Network Analyzer Systems
Installation
Cable List
Table 2-12 Cable List (Connections from the Right Test Head)
From Right Test Head... To: Notes Cable Type Part No.
LO input Millimeter-wave controller --
port 2 LO Output
duplicate listing 3.5 mm RF flex E7342-60004
b RF output [Option 005 only] Millimeter-wave controller --
port 2 RF input (b2)
duplicate listing SMA RF flex E7342-60003
mm drive Millimeter-wave controller --
port 2 mm drive
duplicate listing 2.4 mm RF flex E7342-60005
a RF output [Option 005 only] Millimeter-wave controller --
port 2 RF input (a2)
duplicate listing SMA RF flex E7342-60003
RF input Millimeter-wave controller --
port 2 RF output
duplicate listing 2.4 mm RF flex E7342-60005
Bias Millimeter-wave controller --
port 2 bias
duplicate listing DC E7342-60009
Controller interface
(NOTE: includes IF outputs)
Millimeter-wave controller --
port 2 test head interface
duplicate listing Multi-pin 08510-60126
Bias tee (SMB) (For connection to a user-supplied voltage source. No connecting device is provided.)
Test port 2 (1.0 mm) (For connection to a device under test, directly or through a cable and/or wafer test probe.)