Service manual

8510XF Network Analyzer Systems 2-35
Installation
Cable List
Table 2-11 Cable List (Connections from the Left Test Head)
From Left Test Head... To: Notes Cable Type Part No.
LO input Millimeter-wave controller --
port 1 LO Output
duplicate listing 3.5 mm RF flex E7342-60004
b RF output [Option 005 only] Millimeter-wave controller --
port 1 RF input (b1)
duplicate listing SMA RF flex E7342-60003
mm drive Millimeter-wave controller --
port 1 mm drive
duplicate listing 2.4 mm RF flex E7342-60005
a RF output [Option 005 only] Millimeter-wave controller --
port 1 RF input (a1)
duplicate listing SMA RF flex E7342-60003
RF input Millimeter-wave controller --
port 1 RF output
duplicate listing 2.4 mm RF flex E7342-60005
Bias Millimeter-wave controller --
port 1 bias
duplicate listing DC E7342-60009
Controller interface
(NOTE: includes IF outputs)
Millimeter-wave controller --
port 1 test head interface
duplicate listing Multi-pin 08510-60126
Bias tee (SMB) (For connection to a user-supplied voltage source. No connecting device is provided.)
Test port 1 (1.0 mm) (For connection to a device under test, directly or through a cable and/or wafer test probe.)