Service manual

2-12 8510XF Network Analyzer Systems
Installation
Unpacking the System
Figure 2-3 Removing the Outer Packing Crate
WARNING Always wear safety glasses when removing the clamps and other packing
materials from the crates.
Remove the outer packing crate
1. Remove the clamps holding the packing crate top cover in place.
Remove the top cover and set it aside.
2. Remove the clamps holding the first packing crate wall in place. It does
not matter which wall you remove first.
3. Remove the other walls. Make sure you have people holding the last two
walls in place when you remove the last set of clamps.
4. Set the loading ramp aside for now.
NOTE In double-rack crates, the heaviest wall is the loading ramp. In single rack
crates, the loading ramp is shipped inside the package, placed on top of the
rack (it is a hinged assembly, shipped in the folded position).
Safety Glasses