Service manual

Index 2 8510XF Network Analyzer Systems
damaged shipments, 2-5
detector, 5-15
detector gain calibration, 3-32, 3-34, 5-6, 5-18
diagnostics, 5-39
dimensions, 2-4
directional couplers, 5-9
documents, 1-2
domain menu, 3-4
E
E7340A, 1-5
E7342A, 1-5
E7345A, 1-10
E7346A, 1-11
E7350A, 1-5
E7352A, 1-5
E7355A, 1-10
E7356A, 1-11
E7357, 1-12
edit mult. src. function, 3-5
electrostatic discharge, 2-10, 5-2
environmental requirements, 2-3
error messages, 5-39
overmod, 5-17
spurious, 5-17
unleveled, 5-17
unleveled/overmod, 3-31
error-polling, 5-17
F
factory prest, 2-42
firmware, 3-2
firmware version, 3-2, 5-38
frequency bands, 5-10 to 5-13
frequency control, 5-10
frequency resolution, 2-42
full 2-port calibration, 3-18
full 2-port isolation standards, 3-27
full 2-port transmission standards, 3-26
fuse, 2-9, 2-25
G
GPIB
address switches, 2-25, 5-38
addresses, 2-37
H
harmonic multiplication, 5-11
heating & cooling, 2-3
humidity, 2-3
I
IF freq menu, 3-5
IF frequency (default setting), 2-42
IF frequency function, 3-42
IF gain menu, 3-5, 3-38
IF level gain setting, 3-41
incomplete shipments, 2-5
indicators (power), 5-37
information sources, 1-2 to 1-3
installation
millimeter-wave controller, 2-23 to 2-25
test heads, 2-26 to 2-31
work surface, 2-20
interconnections
controller / test head, 2-28 to 2-31
L
language switches, 2-37, 5-38
LEDs
active, 5-37
millimeter-wave controller, 2-23
test head, 2-27, 5-37
level calibration, 5-18
level control, 5-6, 5-8, 5-14 to 5-19
leveling functions (LO), 3-36
leveling functions (RF), 3-30
leveling settings menu, 3-41
line power, 5-37
line voltage (option 230), 1-9
LO leveling functions, 3-36
LO levels, 5-19
LO power, 3-36
LO power config, 3-5
LO power settings, 3-37
load/short standards, 3-23
M
measurement
accuracy-enhanced, 2-3
calibration, 3-6 to 3-27
menu
changes (overview), 3-4
conventions, 3-3
messages
caution, vi, 2-9, 2-10, 2-11
error, 5-39
overmod errors, 5-17
spurious errors, 5-17
unleveled errors, 5-17
warning, vi, 2-9, 2-10, 2-12, 2-15, 2-16, 5-39
millimeter-wave controller
connectors, 2-24
front panel, 2-23
installation, 2-23 to 2-25
LEDs, 2-23