Service manual

ManualsBrandsAgilent Technologies ManualsNetwork Router8510C

7-46 8510XF Network Analyzer Systems

Menus & Commands

New GPIB Commands

SOU2OFF [SYSTEM] {MORE} {LO POWER CONFIG}

{LO LEVEL -- LEVELING OFF}

Places the 83621B LO source in leveling-off

mode.

SOU2POWOFF [SYSTEM] {MORE} {LO POWER CONFIG}

{LO POWER OFF}

Deactivates RF power from the 83621B LO

source.

SOU2POWON [SYSTEM] {MORE} {LO POWER CONFIG}

{LO POWER ON}

Activates RF power from the 83621B LO

source.

SOU2POW? No softkey equivalent Queries the status of LO power (0 for OFF,

1 for ON).

SOU2SYS [SYSTEM] {MORE} {LO POWER CONFIG}

{LO LEVEL -- SYSTEM}

Places leveling of the 83621B LO source

under control of the 8510XF.

TSPEEK [SYSTEM] {MORE} {SERVICE}

{XF TESTSET SERVICE} {PEEK TEST

SET}

Used by Agilent service engineers to read

from a location (speciﬁed by the TSPEEL

command) in the memory of the

millimeter- wave controller.

TSPEEL [SYSTEM] {MORE} {SERVICE}

{XF TESTSET SERVICE} {PEEK/POKE

LOCATION}

Used byAgilent service engineers to specify

a location in the memory of the

millimeter-wave controller.

TSPOKE <byte> [SYSTEM] {MORE} {SERVICE}

{XF TESTSET SERVICE} {POKE TEST

SET}

Used by Agilent service engineers to write a

byte of data to a location (speciﬁed by the

TSPEEL command) in the memory of the

millimeter-wave controller.

COMMAND EQUIVALENT SOFTKEY FUNCTION