Service manual

4-4 8510XF Network Analyzer Systems
Performance Verification
Frequency ranges
For most of the menu items in the software, there are two or more selections
that pertain to the 8510XF. These menu selections are differentiated by:
A. The frequency range of the millimeter wave subsystem
❍ E7352A: 110 GHz subsystem
❍ E7342A: 85 GHz subsystem
❍ Option 005: 45MHz to 2 GHz
B. The portion of the subsystem’s frequency range that is being verified (the
ranges above and below 50 GHz are verified separately).
The menu selections are broken down in Tables 4-2 and 4-3, below.
Table 4-2 System Hardware Configuration (E7352A -- 110 GHz System)
Hardware Selection (<50 GHz Range) Selection (>50 GHz Range)
Network Analyzer 8510C -- Vector Network Analyzer 8510C -- Vector Network Analyzer
Test Set E7352A -- 1.0 mm Subsystem (2-50 GHz)
E7352A005 -- 1.0 mm Subsystem (45MHz-50GHz)
E7352A110 -- 1.0 mm (50 GHz-110 GHz)
Source 8365xXF -- Synthesizer (45 MHz-50 GHz) 836xxXF -- Multiplied Synth. (above 50 GHz)
Calibration Kit
1
85059A -- 1.0 mm (45 MHz-50 GHz) [Use w/
E7342A/52A]
85059A110 -- 1.0 mm (50 GHz-110 GHz)
Calibration
Technique
BL -- Broadband Load Cal OS -- Offset Short Cal
Test Port Cables DIRECTXF -- for 8510XF verification (1.0 mm-1.0 mm) DIRECTXF -- for 8510XF verification (1.0 mm-1.0 mm)
Verification Kit 85059AOV -- 1.0 mm (45 MHz-50 GHz) 85059AOV110 -- 1.0 mm (above 50 GHz)
1. The 85059A --1.0 mm (45MHz-50GHz) [Use w/ 8517A/B] selection is not used for the 8510XF Performance Verification.
Table 4-3 System Hardware Configuration (E7342A -- 85GHz System)
Hardware Selection (<50 GHz Range) Selection (>50 GHz Range)
Network Analyzer 8510C -- Vector Network Analyzer 8510C -- Vector Network Analyzer
Test Set E7342A -- 1.0 mm Subsystem (2-50 GHz)
E7342A005 -- 1.0 mm Subsystem (45 MHz-50GHz)
E7342A85 -- 1.0 mm (50 GHz-85 GHz)
Source 8365xXF -- Synthesizer (45 MHz-50 GHz) 836xxXF --
Synth. (above 50 GHz)
Calibration Kit
1
85059A -- 1.0 mm (45 MHz-50 GHz) [Use w/
E7342A/52A]
85059A85 -- 1.0 mm (50 GHz-85 GHz)
Calibration
Technique
BL -- Broadband Load Cal OS -- Offset Short Cal
Test Port Cables DIRECTXF -- for 8510XF verification (1.0 mm-1.0 mm) DIRECTXF -- for 8510XF verification (1.0 mm-1.0 mm)
Verification Kit 85059AOV -- 1.0 mm (45 MHz-50 GHz) 85059AOV110 -- 1.0 mm (above 50 GHz)
1. The 85059A --1.0 mm (45MHz-50GHz) [Use w/ 8517A/B] selection is not used for the 8510XF Performance Verification.