Service manual

3-40 8510XF Network Analyzer Systems
Operation
Service
XF Test Set Service [SYSTEM] {MORE} {SERVICE FUNCTIONS} {XF TESTSET SERVICE} calls up the following
menu:
Figure 3-22 XF Test Set Service Menu, Leveling Settings Submenu,
and Equivalent GPIB Commands
This menu includes those service functions which apply specifically to the
test set (that is, the millimeter-wave controller and the test heads), rather
than to the network analyzer.
These functions are intended to be used only by Agilent service engineers.
Show/Hide Configuration The first softkey toggles between two modes:
• If {SHOW CONFIGURATION} is selected, information about the system
hardware configuration (frequency bands, test heads, etc.) is displayed.
• If {HIDE CONFIGURATION} is selected, information about the system
hardware configuration is not displayed.
Leveling The {LEVELING SETTINGS} softkey calls up a submenu (see “Leveling Settings”
on page 3-41).