Service manual

8510XF Network Analyzer Systems 3-33
Operation
RF Power
RF Power Settings [SYSTEM] {MORE} {RF POWER CONFIG} {RF POWER SETTINGS} calls up the following
submenu:
Figure 3-18 RF Power Settings Submenu & Equivalent GPIB Commands
NOTE The functions represented on this menu will not work if {RF LEVEL /SYSTEM} is
selected on the
[SYSTEM] {MORE} {RF POWER CONFIG} menu (see “RF Power
Configuration” on page 3-30). These functions are not used during normal
operation of the system; they are made available for service use, or for
unusual measurement situations.
RF Source Power {RF SOURCE POWER}, followed by a number, specifies a power level setting for
the 83651B RF source, in dBm.
RF Source Slope {SLOPEON} and {SLOPE OFF} are used to enable and disable power slope for the
RF source.
{SLOPE ON}, followed by a number, specifies the power slope
setting for the RF source, in dB/GHz.