Service manual

3-30 8510XF Network Analyzer Systems
Operation
RF Power
RF Power
RF power functions that are not port-specific are accessed using the RF
Power Configuration and RF Power Settings menus, described below.
RF Power
Configuration
[SYSTEM] {MORE} {RF POWER CONFIG} calls up the following menu:
Figure 3-17 RF Power Configuration Menu, Submenus,
and Equivalent GPIB Commands
RF Leveling Functions The first four softkeys specify different methods of controlling RF power.
If
{RF LEVEL / SYSTEM} is selected, leveling of RF power at the test ports is
controlled entirely by the 8510XF system. This is the normal operating
mode.
NOTE The remaining “RF LEVEL” selections are provided as a convenience for
use in unusual applications; they are not recommended for normal operation
of the 8510XF.