Service manual

12 Agilent 8494A/B, 8495A/B, 8496A/B Operating And Service Manual
Service
Replacing the Connector Outer Shell
NOTE The connector outer shell can be replaced only on the Option 001 (type-N
female) or the Option 003 (7 mm). The outer shell on the Option 002 (SMA)
cannot be replaced in the field.
The connector outer shells on the Option 001 and 003 may be replaced as
follows:
1. With a 9/16-inch (1/2-inch for 7 mm) thin open-end wrench, unscrew
the outer connector body.
2. Replace the connector outer shell. See Table 3 on page 10 for
replaceable parts numbers.
3. Tighten the connector with the same wrench called out in step 1.