Service manual

10 Agilent 8494A/B, 8495A/B, 8496A/B Operating And Service Manual

Replaceable Parts

Table 3 lists the replaceable parts which are the only parts that can be

replaced without access to the interior of the instrument. If any parts not

listed below need replacement, return the instrument to Agilent

Technologies.

CAUTION Due to special ﬁxtures necessary for assembly, do not attempt to replace any

parts not listed in the table below. If the instrument is opened, the warranty is

void.

NOTE Option 002 (SMA) connectors are not replaceable without access to the

interior of the instrument. If these connectors are damaged, return the

instrument to Agilent Technologies.

Table 3 Replaceable Parts

Description Part Number

Knob 0370-1091

Option 003 APC-7 center conductor contact 1250-0907

Option 003 APC-7 connector outer shell assembly 1250-0909

Option 001 Type N female connector outer shell 1250-0914

Screws for both bases: 4-40 x 7/8 in. Fillister head 2220-0006

Label 0-110 dB for 8496A and B 7120-0543

Label 0-70 dB for 8495A and B 7120-3376

Label 0-11 dB for 8494A and B 7120-4525

Base for 8495A & B 5041-3887

Base for 8494A and B and 8496A and B 5041-3888