Service manual

Introduction 1
Agilent 8495D/K Attenuators Operating and Service Manual 13
Solenoid Cable Connectors
Refer also to Figure 2 on page 13.
Figure 2 Solenoid Cable Pin Configuration
Table 2 Solenoid Cable Connectors
Section Section 1 Section 2 Section 3 Section 4 Power
V+
Solenoid Coil Thru-
Line
Atten
Card
Thru-
Line
Atten
Card
Thru-
Line
Atten
Card
Thru-
Line
Atten
Card
Cable Wire Color Code
[1]
PUR YEL BLK GRN ORN BLU BRN WHT RED
Connector Plug Pin Number
[2]
567891011121
8495K 0 dB 10 dB 0 dB 20 dB 0 dB 20 dB 0 dB 20 dB –
Option 016
Flat Pack Plug Pin Number
[3]
132115 3 9 4106
[1] Five-foot cable and mating plug assembly provided.
[2] Pin 1 (red wire) is common for all coils. Pins 2, 3, and 4 are not used.
[3] Pin 6 is common for all coils. Pins 1, 7, 8, 12, and 14 are not used.
Plug, front view
Jack, front view
(1)
(7)
(8)
(14)
Plug, bottom view