User`s guide
Table Of Contents
- Legal Information
- Equipment Operation
- General Safety Considerations
- Regulatory Information
- List of Related Publications
- Agilent TechnologiesE4418B Options
- About this Guide
- Getting Started
- Power Meter Operation
- Introduction
- Battery Operation (Option 001)
- Zeroing and Calibrating the Power Meter
- Making Measurements with the AgilentE-Series Power Sensors
- Making Measurements with the Agilent8480 Series Power Sensors
- Making Measurements using Sensor Calibration Tables
- Making Measurements using Frequency Dependent Offset Tables
- Setting the Units of Measurement
- Selecting Units of Measurement from the Softkeys
- Making Relative Measurements
- Setting the Resolution
- Setting Offsets
- Setting Averaging
- Measuring Pulsed Signals
- Setting Measurement Limits
- Selecting a Digital or Analog Display
- Setting the Range
- Configuring the Remote Interface
- Recorder Output
- Saving and Recalling Power Meter Configurations
- How Measurements are Calculated
- Presetting the Power Meter
- Self Test
- Operator Maintenance
- Contacting Agilent Technologies
- Menu Reference
- Error Messages
- Specifications
Agilent E4418B User’s Guide Index-3
"Filter" key description 3-27
"Filter Off On" key description
3-27
framing error in program, error message
4-11
"Freq Dep Offset" key description
3-25
"Freq" key description
3-13
frequency dependent offset tables
editing 2-29
selection of 2-27
using 2-27
frequency range
5-14
specification 5-3
frequency, characteristic of power reference
5-6
"Frequency/Cal Fac"
key description 3-13
menu map 3-4
fuse
1-16
replacing 2-73
G
gain 2-36
GET not allowed, error message
4-4
getting started
1-1
GP-IB
1-16
compatibility 5-16
connector characteristic 5-14
language selection 2-58
setting of address 2-53
"GP-IB Addr" key description
3-22
"GP-IB" key description
3-21, 3-22
ground connector
1-17
H
handle, adjusting 1-18
hardkeys
1-4, 1-6, 3-3
hardware missing, error message
4-9
"HP 437B" key description
3-21
humidity characteristic
5-15
I
illegal parameter value, error message 4-7
increment digits
3-37
"Individual" key description
3-29
init ignored, error message
4-6
input buffer overrun, error message
4-11
"Input Settings" key description
3-26
"Insert Char" key description
3-20
"Insert" key description
3-24, 3-25
installing in cabinet
1-19
instrument
self-test 2-68
serial numbers 1-17, 2-75
"Instrument Self Test" key description
3-29
interface bus
language selection 2-58
setting of address 2-53
"Interface Overview" key description
3-32
invalid
block data, error message 4-6
character in number, error message 4-5
character, error message 4-4
separator, error message 4-4
string data, error message 4-6
suffix, error message 4-5
K
"Keyboard" key description 3-30
keyboard self-test
2-71
keys
3-3
L
language 2-58, 5-16
LED
3-37
legal information
iii
"Length" key description
3-28
limit failures
2-47
limit setting
1-8, 2-43
channel limits 2-43
"Limits" (window) key description
3-16
"Limits" key description
3-26
"Limits Off On" (window) key description
3-16
"Limits Off On" key description
3-26
"Limits OVER UNDER EITHER" key description
3-17
limits setting
window limits 2-44
line power characteristic
5-14
"Linearity ATyp Dtyp" key description
3-26
"Lithium Battery" key description
3-30
"Local Loop Back" key description
3-31
logarithmic units
2-32
loss
2-36
lower limit
2-43
HP4402.book Page 3 Wednesday, November 29, 2000 4:46 PM