User`s guide
Table Of Contents
- Legal Information
- Equipment Operation
- General Safety Considerations
- Regulatory Information
- List of Related Publications
- Agilent TechnologiesE4418B Options
- About this Guide
- Getting Started
- Power Meter Operation
- Introduction
- Battery Operation (Option 001)
- Zeroing and Calibrating the Power Meter
- Making Measurements with the AgilentE-Series Power Sensors
- Making Measurements with the Agilent8480 Series Power Sensors
- Making Measurements using Sensor Calibration Tables
- Making Measurements using Frequency Dependent Offset Tables
- Setting the Units of Measurement
- Selecting Units of Measurement from the Softkeys
- Making Relative Measurements
- Setting the Resolution
- Setting Offsets
- Setting Averaging
- Measuring Pulsed Signals
- Setting Measurement Limits
- Selecting a Digital or Analog Display
- Setting the Range
- Configuring the Remote Interface
- Recorder Output
- Saving and Recalling Power Meter Configurations
- How Measurements are Calculated
- Presetting the Power Meter
- Self Test
- Operator Maintenance
- Contacting Agilent Technologies
- Menu Reference
- Error Messages
- Specifications
Specifications
Environmental Characteristics
Agilent E4418B User’s Guide 5-15
Environmental Characteristics
General Conditions
Complies with the requirements of the EMC Directive 89/336/EEC. This
includes Generic Immunity Standard EN 50082-1: 1992 and Radiated
Interference Standard EN 55011:1991/CISPR11:1990, Group 1 - Class A.
Operating Environment
Temperature
0ºC to 55ºC
Maximum Humidity
95% at 40ºC (non-condensing)
Minimum Humidity
15% at 40ºC (non-condensing)
Maximum Altitude
3,000 meters (9,840 feet)
Storage Conditions
Storage Temperature
-20ºC to +70ºC
Non-Operating Maximum Humidity
90% at 65ºC (non-condensing)
Non-Operating Maximum Altitude
15,240 meters (50,000 feet)
HP4402.book Page 15 Wednesday, November 29, 2000 4:46 PM