User`s guide
Table Of Contents
- Legal Information
- Equipment Operation
- General Safety Considerations
- Regulatory Information
- List of Related Publications
- Agilent TechnologiesE4418B Options
- About this Guide
- Getting Started
- Power Meter Operation
- Introduction
- Battery Operation (Option 001)
- Zeroing and Calibrating the Power Meter
- Making Measurements with the AgilentE-Series Power Sensors
- Making Measurements with the Agilent8480 Series Power Sensors
- Making Measurements using Sensor Calibration Tables
- Making Measurements using Frequency Dependent Offset Tables
- Setting the Units of Measurement
- Selecting Units of Measurement from the Softkeys
- Making Relative Measurements
- Setting the Resolution
- Setting Offsets
- Setting Averaging
- Measuring Pulsed Signals
- Setting Measurement Limits
- Selecting a Digital or Analog Display
- Setting the Range
- Configuring the Remote Interface
- Recorder Output
- Saving and Recalling Power Meter Configurations
- How Measurements are Calculated
- Presetting the Power Meter
- Self Test
- Operator Maintenance
- Contacting Agilent Technologies
- Menu Reference
- Error Messages
- Specifications
Menu Reference
Front Panel Menu Reference Diagramatical Keys
Agilent E4418B User’s Guide 3-37
Press this hardkey to:
• increment the alphanumeric digit on which the cursor is currently
positioned. That is, digits scroll 0 through 9, and characters
lowercase a through z, uppercase A through Z, then underscore.
• select fields for editing on the “Edit Table” screen.
• select a table in the “Sensor Cal Tables” screen.
• select a file in the “Save” and “Recall” screens.
Press this hardkey to select the upper or lower measurement window on
the power meter’s display. The window which is selected is highlighted by
a shadowed box. Any measurement setup you create using ,
and is implemented in the selected window.
Press this hardkey to choose from a one or a two window display.
Press this hardkey to switch the power meter between on and standby.
When the power meter is switched to standby (that is, when this hardkey
is off but the power is connected to the instrument) the red LED is lit.
When the power meter is switched on the green LED is lit.
dBm/W
Meas
Setup
Rel
Offset
HP4402.book Page 37 Wednesday, November 29, 2000 4:46 PM