User`s guide
Table Of Contents
- Legal Information
- Equipment Operation
- General Safety Considerations
- Regulatory Information
- List of Related Publications
- Agilent TechnologiesE4418B Options
- About this Guide
- Getting Started
- Power Meter Operation
- Introduction
- Battery Operation (Option 001)
- Zeroing and Calibrating the Power Meter
- Making Measurements with the AgilentE-Series Power Sensors
- Making Measurements with the Agilent8480 Series Power Sensors
- Making Measurements using Sensor Calibration Tables
- Making Measurements using Frequency Dependent Offset Tables
- Setting the Units of Measurement
- Selecting Units of Measurement from the Softkeys
- Making Relative Measurements
- Setting the Resolution
- Setting Offsets
- Setting Averaging
- Measuring Pulsed Signals
- Setting Measurement Limits
- Selecting a Digital or Analog Display
- Setting the Range
- Configuring the Remote Interface
- Recorder Output
- Saving and Recalling Power Meter Configurations
- How Measurements are Calculated
- Presetting the Power Meter
- Self Test
- Operator Maintenance
- Contacting Agilent Technologies
- Menu Reference
- Error Messages
- Specifications
Menu Reference
The Front Panel Menu Maps
Agilent E4418B User’s Guide 3-9
System Inputs Menu (3 of 4)
SCPI
HP437B
System
Inputs
Remote
Interface
Cmd Set
Select
Configure
Interface
Interface
Interface
Overview
RS422
RS232
GPIB
Serial
GPIB
GPIB Addr
13
Pacing
Parity
NONE
Word Size
8
Baud Rate
9600
Stop Bits
1
Echo
On Off
More
Tx Pacing
Rx Pacing
RTS/CTS
OFF
DTR/DSR
OFF
None Xon
None Xon
See page 3-7
(IEEE 488)
HP4402.book Page 9 Wednesday, November 29, 2000 4:46 PM