User`s guide
Table Of Contents
- Legal Information
- Equipment Operation
- General Safety Considerations
- Regulatory Information
- List of Related Publications
- Agilent TechnologiesE4418B Options
- About this Guide
- Getting Started
- Power Meter Operation
- Introduction
- Battery Operation (Option 001)
- Zeroing and Calibrating the Power Meter
- Making Measurements with the AgilentE-Series Power Sensors
- Making Measurements with the Agilent8480 Series Power Sensors
- Making Measurements using Sensor Calibration Tables
- Making Measurements using Frequency Dependent Offset Tables
- Setting the Units of Measurement
- Selecting Units of Measurement from the Softkeys
- Making Relative Measurements
- Setting the Resolution
- Setting Offsets
- Setting Averaging
- Measuring Pulsed Signals
- Setting Measurement Limits
- Selecting a Digital or Analog Display
- Setting the Range
- Configuring the Remote Interface
- Recorder Output
- Saving and Recalling Power Meter Configurations
- How Measurements are Calculated
- Presetting the Power Meter
- Self Test
- Operator Maintenance
- Contacting Agilent Technologies
- Menu Reference
- Error Messages
- Specifications
Menu Reference
The Front Panel Menu Maps
Agilent E4418B User’s Guide 3-7
System Inputs Menu (1 of 4)
Note Depending on the power meter’s setup you will be unable to select
certain softkeys. The text on these softkey labels appears grayed
out. Refer to the appropriate softkey descriptions for further
information.
Off On
†
Agilent E-series power sensors only
System
Inputs
Freq Dep
Linearity
Offset
ATyp DTyp
More
Input
Settings
Power Ref
Off On
Tables
Sensor Cal
Tables
Done
Offset
0.000 dB
Limits
Max
Min
90.000 dBm
-90.000 dBm
Insert
Delete
Change
Done
Range |
AUTO
Table
Off On
Edit
Tables
Offset
Off On
Limits
Off On
Length
MAN AUTO
Filter
Off On
Off On
Mode
128
Step Det
Duty Cycle
Duty Cycle
1.000%
Filter
See page 3-9
Remote
Interface
HP4402.book Page 7 Wednesday, November 29, 2000 4:46 PM