User`s guide
Table Of Contents
- Legal Information
- Equipment Operation
- General Safety Considerations
- Regulatory Information
- List of Related Publications
- Agilent TechnologiesE4418B Options
- About this Guide
- Getting Started
- Power Meter Operation
- Introduction
- Battery Operation (Option 001)
- Zeroing and Calibrating the Power Meter
- Making Measurements with the AgilentE-Series Power Sensors
- Making Measurements with the Agilent8480 Series Power Sensors
- Making Measurements using Sensor Calibration Tables
- Making Measurements using Frequency Dependent Offset Tables
- Setting the Units of Measurement
- Selecting Units of Measurement from the Softkeys
- Making Relative Measurements
- Setting the Resolution
- Setting Offsets
- Setting Averaging
- Measuring Pulsed Signals
- Setting Measurement Limits
- Selecting a Digital or Analog Display
- Setting the Range
- Configuring the Remote Interface
- Recorder Output
- Saving and Recalling Power Meter Configurations
- How Measurements are Calculated
- Presetting the Power Meter
- Self Test
- Operator Maintenance
- Contacting Agilent Technologies
- Menu Reference
- Error Messages
- Specifications
Menu Reference
The Front Panel Menu Maps
3-6 Agilent E4418B User’s Guide
Rel/Offset Menu
Save/Recall Menu
Note Depending on the power meter’s setup you will be unable to select
certain softkeys. The text on these softkey labels appears grayed
out. Refer to the appropriate softkey descriptions for further
information.
Rel
Offset
Rel
Rel
Offset
Offset
Off On
Off On
0.000dB
Save
Recall
Done
Save
Recall
Enter
Insert
Edit
Cancel
Name
Char
Delete
Char
HP4402.book Page 6 Wednesday, November 29, 2000 4:46 PM