User`s guide
Table Of Contents
- Legal Information
- Equipment Operation
- General Safety Considerations
- Regulatory Information
- List of Related Publications
- Agilent TechnologiesE4418B Options
- About this Guide
- Getting Started
- Power Meter Operation
- Introduction
- Battery Operation (Option 001)
- Zeroing and Calibrating the Power Meter
- Making Measurements with the AgilentE-Series Power Sensors
- Making Measurements with the Agilent8480 Series Power Sensors
- Making Measurements using Sensor Calibration Tables
- Making Measurements using Frequency Dependent Offset Tables
- Setting the Units of Measurement
- Selecting Units of Measurement from the Softkeys
- Making Relative Measurements
- Setting the Resolution
- Setting Offsets
- Setting Averaging
- Measuring Pulsed Signals
- Setting Measurement Limits
- Selecting a Digital or Analog Display
- Setting the Range
- Configuring the Remote Interface
- Recorder Output
- Saving and Recalling Power Meter Configurations
- How Measurements are Calculated
- Presetting the Power Meter
- Self Test
- Operator Maintenance
- Contacting Agilent Technologies
- Menu Reference
- Error Messages
- Specifications
Menu Reference
The Front Panel Menu Maps
Agilent E4418B User’s Guide 3-5
Meas Setup Menu
Meter
Dgtl Anlg
Anlg Mtr
Scaling
Meas
Setup
Limits
Resolution
1 2 3 4
Display
Format
Off On
Max
90.000 dBm
Min
-90.000 dBm
TTL
Output
Max
20.000 dBm
Min
-70.000 dBm
Off On
Limits
OVER
Fail O/P
High Low
TTL Output
HP4402.book Page 5 Wednesday, November 29, 2000 4:46 PM